!#7# You know, like a chain saw blade and measure the chain?

!±8± You know, like a chain saw blade and measure the chain?

It is your chainsaw starts seem boring and not so good? It seems that the time to replace the chain. To do this, you must know the length of the two with the chainsaw blade and the length and size of the chain. If you checked the manufacturer's graphics seem a bit 'overwhelming. But it's really quite simple if you understand what it is about the length of the blade and the saw.

If you are ready to replace the chain, theThe first thing to do is to determine the size of the chainsaw bar. If you have an Oregon chain happen, this should be easy. Just select the first two numbers of ten digits, which is available on the motor side of the blade. This is the length of chain saw bar.

Do not have a chainsaw Oregon, which shows only the length of the blade? So here are some tips to see in person.

What is the best way to measure the blade of a chainsaw?

To measure the chainsawBlade itself is quite easy to do. Simply enter your measuring tape at the end of the bar against the body and measuring the bar down to the tip of the blade.

Blade and the bar are two terms that are used both to demonstrate the same item. This is the blade that extends from the motor body and brings the chain that looks like the saw for you.

The producers were kind enough to standardize blade length increases to two inches. Morecommon sizes are 16, 18 and 20 inches, although the entire range is 10-42 inches! If the knife is measured to the nearest 2-inch size, if necessary.

Size-A Chainsaw Chain

To measure the chain on the chainsaw, there are two things you should know ... the number of links in the chain units and the slope.

A link unit is simply a tooth on the chain and the chain length is limited by the number of links drive (or teeth) is determined. The pitch of theLinks of the chain also affects the size of the unit.

The chain pitch is important to know how to pitch is the tip of the drive wheel and pinion corresponds bars. This link should be provided on the drive, but if you need to measure the field, we take the distance between three rivets in the chain and divide by 2.

By way of example, a 1 / 4 "chain pitch might have ties 52 units in length and 2.17 meters, while a 3 / 8" pitch with 52 hard links would be 3.18 metersLength. So, hit up the size of the bond of unity, which affects the length of the hand.

Still have questions? Only with a chainsaw to a producer who does or chains and to clarify the ambiguities of the situation may need to check.